Safety Features

In the past, most pressure cooker disasters could usually be attributed to user error. Instant Pot was carefully designed to eliminate and avoid most of the potential problems. UL Logo Safety Features Instant Pot is made by the No.1 electric pressure cooker manufacturer with over 10 million units already in household use worldwide. Instant Pot products are certified by UL/ULC providing unprecedented peace of mind in safety.

Instant Pot's pressure sensor mechanism

InstantPot’s pressure sensor mechanism

The stove-top pressure cookers use the weight of pressure regulator on the lid to limit the cooking pressure. Instant Pot’s patented pressure senor technology regulates the pressure in the inner pot in a much more precise and automatic fashion.  When pressure builds up in the inner pot, the Flat Flexible Board (see diagram on right) shifts downwards to trigger the pressure sensor.   Conversely, when the pressure is lightened, the  Flat Flexible Board moves upwards and again triggers the pressure sensor.

Pressure control mechanism in the base

Pressure control mechanism in the base

The pressure sensor controls the power of the heating element to maintain the pressure within a preset range. The photo of the actual pressure sensor is shown on the left.

This technology revolutionized the safety of pressure cooking. Apart from this unique innovation,  Instant Pot has 10 level of safety protections.

Safety mechanism 600x265 Safety Features

1. Lid Close Detection

If the lid is missing or not closed properly, Instant Pot will not activate pressurized cooking.  Only the keep-warm and sauté (in applicable models only) functions work with the lid being open.

2. Leaky Lid Protection

In the case that the cooker lid has leakage (e.g. the steam release not closed properly, the sealing ring being missing), the cooker will not reach preset pressure level.  Allowing this to continue would risk burning the food. Instant Pot detects this by measuring the pre-heating time. If the pre-heating is unusually long, the programming will be switched to Keep-warm to avoid burning the food.

3. Lid Lock under Pressure

If the cooker is still pressurize, the lid will be locked to prevent accidental opening.

Anti-blockage shield prevents jamming of the steam release

Anti-jam shield prevents jamming of the steam release

4. Anti-blockage Vent

During cooking, food particles could jam the steam release vent. Instant Pot has specially structured vent shield (see picture on right) to prevent jamming the steam release.

Temperature sensor under the inner pot

Thermostat under the inner pot

5. Automatic Temperature Control

The thermostat under the inner pot regulates the temperature of the inner pot to be within a safe range, based on the type of food being cooked.

6. High Temperature Warning

If the cooker is operating without water or moisture, pressure will not be built up in the pot. Over heating become the most likely outcome. Excessive temperature may also build up due to situations such as,  missing inner pot, inner pot not in proper contact with heating element,  or inner pot having heat dissipation problem (e.g. burnt starch at the bottom of the inner pot blocking heat dissipation). Under such conditions, Instant Pot will stop heating when the temperature is over a certain limit.

7. Extreme Temperature & Power Protection

Instant Pot is equipped with a special fuse which disconnects power  at excessively high temperature, i.e. 169°C ~ 172°C or 336°F ~ 341.6°F, and extremely high electrical current. A extremely high electrical current drawn by the cooker indicates an unsafe situation.

8. Automatic Pressure Control

The patented pressure sensor mechanism (shown in diagram at the top) keeps the operating pressure between 70kPa-80kPa, or 10.12psi ~ 11.6 psi.

9. Pressure Regulator Protection

If the pressure exceeds 105kPa (15.23 psi), the steam release (comparable to the pressure regulator in stove-top pressure cookers) will be pushed up to allow the steam being released to bring down the pressure inside the pot.

Over-pressure leaking mechanism between the cover and inner pot

Over-pressure leaking mechanism between the lid and inner pot

10. Excess Pressure Protection

If the pressure becomes too high and  pressure regulator protection malfunctioned, Instant Pot’s internal protection mechanism will activate, shifting the inner pot downwards to create a gap between the lid and the inner pot. Steam will be released from the gap into the internal chamber and heating stopped.

Print Friendly